Second Lid Heat Sealing Machine

Second Lid Heat Sealing Machine

Description

Fully automatic sealing machine is designed to seal second cover to main cover of the battery. All the machine positional settings, temperatures and times are stored safely and can be accessed from the recipe recall functions.

HTS MF60 – Second Lid Heat Sealing Machine

Features

  • Efficient Production and High Productivity
  • Up to 6 batteries/minute
  • Work with 1×6 and 2×3 layouts
  • High Standards for Health, Safety and Environment

Fully automatic sealing machine is designed to seal second cover to main cover of the battery. All the machine positional settings, temperatures and times are stored safely and can be accessed from the recipe recall functions.

  • Two operation heads, both head can run separately or together
  • Battery delay system
  • Advanced pneumatic mold fixing system
  • Easy battery centering and positioning system with pre-adjusted fixtures
  • Special casted heater plate for homogenous heat and stainless steel mold for long life operation
  • Servo motors for lid holder and heater control
  • Lid holders with vacuum suction
  • Touch screen operator panel
  • Easy change over system
  • Stainless steel frame and conveyor system
  • Fault alarm for heaters with defected heater interface
  • Transparent security doors with safety switch according to CE standards
  • Automatic standby mode conveyor system within adjusted time if there is no battery on it
  • Transfer mode is available if there is no MF battery in production
  • Sealer references from the first lid, not from the box to ensure precise sealing
  • Cooling system to prevent the damage of the lids during the melting

Optional Features

  • Pre Heating for Heater Plate
  • HTS MF30 with 1 operation head (capacity up to 3 batteries/min)
  • HTS MF90 with 3 operation head (capacity up to 9 batteries/min)

Capacity

  • Up to 6 batteries / minute

Required Labor

  • None

Operational Range

  • Supported Lid Width: 125-280mm
  • Supported Lid Length: 196-520mm

Technical Data

  • Siemens PLC system
  • Festo Pneumatic System
  • Siemens or Sew Eurodrive Servo Motors
  • Installation Power : 17 kW
  • Electrical Power Consumption : 17  kW
  • Air Pressure : 5-7 bar
  • Air Consumption :  138 litres/minute
  • Mold Resistance: 1 kWx12 pieces
  • Color : Stainless Steel